Home » สกรูหลังคาเหล็ก »
สกรูปลายสว่านยึดไม้
BDN Fasteners® Timber-Tite™ สกรูปลายสว่านยึดไม้
- หัวเจาะ 17 แฉก ออกแบบมาเพื่อช่วยให้การเจาะไม้เนื้อแข็งเป็นเรื่องง่าย
- เพิ่มความแข็งแรงในการดึงออกจากเนื้อไม้
- AS3566 มาตรฐานออสเตรเลีย
- SST 1000hrs + Kesternich 7 Cycles
สกรูปลายสว่านยึดไม้ – TIMBER-Tite™
Our sharp pointed metal to wood screws, TIMBER-Tite™ are designed for fixing roof sheeting to timber. The longer versions such as the T17CG1265C3N or T17CG1250C3N are designed for crest fixing and shorter versions such as the T17H1020C3N are designed for valley fixing. People ask why screws should be fixed down on the crest but not the valley. The main reason being water runs by gravity and flows to the lowest point, and if fixed on the valleys on rooftops, might increase the risk of water pooling around the screws and with time, cause rust.
Shorter self-tapping metal to wood screws which come with what we call a “reduced” drilling point, provides the same function as a sharp drilling point, but drills faster through thin metal sheeting, and is much more effective at clearing off excess swarf, as it is difficult if impossible to add flutes on smaller sharp pointed screws to due manufacturing limitations.
สกรูปลายสว่านยึดไม้
For roofing sheet fixing screws, always check if they come with a knurled, fluted, or slotted shank, and if the upper threads are larger in diameter compared to the lower threads. You might notice that the majority of BDN self-drilling and self-tapping roofing screws are equipped with both. The larger diameter upper threads provide good pullout strength for the whole setup under high winds and the slotted Scratshank design clears out excess swarf which might damage EPDM washers if leftover, which could result in leaks.
Are you looking for something?
View more products or directly contact us!
If you need more information about our products or get samples, we are very happy to help!
Learn more about roofing screws >>
Impact of metal roof screws rusting & how to prevent the damage
