Polycarbonate Roof Fasteners Series
POLY-FAST™ fasteners features a cutting washer to create a much-required thermal expansion hole on plastic profiled roofing panels, which is then securely fastened onto the purlin support underneath in one-go. A nominal 11mm diameter thermal expansion hole is created during the process. The cutting washer also functions as stopper when mated with serrated knurls on the shank, preventing screw over-run or over-drive, and squashing of the raised profile. A large domed BAZ with two concentric sealing rims on the washer underside completes the package – the domed structure providing superior strength against high winds, and two concentric sealing rims keeping the expansion hole fully sealed.
POLY-FAST™ – Polycarbonate Roofing Fasteners (For Steel)
For fixing polycarbonate roof sheets to Steel
BN3 Series
SST 1000hrs + Kesternich 7 Cycles
PART NUMBER
SDHXPS12060C3
12-14 x 60mm
STEEL PENETRATION
Suitable for 0.75 to 4.5mm thick steel
ADAPTER TO USE
Magnetic Hex Socket (5/16”)
PRODUCT FEATURES
Saves 50% of labor time – create an expansion hole and fix sheets in one go.
- Built in thermal expansion hole Cutting Washer.
- Creates an 11mm Expansion Hole.
- Ø 25mm Domed weatherseal EPDM washer.
- Fool proof design for both beginners and professionals.
WASHER
Ø 25mm Domed weatherseal EPDM washer
- Domed Structure: Superior strength against high winds.
- Two Concentric Sealing Rims: Keeps the 11mm expansion hole fully sealed.
Installation Procedure:
- Press drill point onto the corrugation crest.
- Use a lower RPM and tap in quick succession untill the polycarbnate sheet is penetrated and drill point comes in contact with the steel substrate.
- Continue to drill through the steel substrate as you would a standard TEK srew.
- The circular saw will penetrate the polycarbonate sheet and form a perfect expansion hole.
- Stop drilling when the domed EPDM conforms to the corrugation, which forms a weather tight seal.
POLY-FAST™ – Polycarbonate Roofing Fasteners (For Timber)
For fixing polycarbonate roof sheets to timber battens
BN3 Series
SST 1000hrs + Kesternich 7 Cycles
PART NUMBER
T17HXPS1250C3
12-11 x 50mm
TIMBER PENETRATION
Min 20mm penetration
ADAPTER TO USE
Magnetic Hex Socket (5/16”)
PRODUCT FEATURES
Saves 50% of labor time – create an expansion hole and fix sheets in one go.
- Suitable for use with treated timber.
- Built in thermal expansion hole Cutting Washer.
- Creates an 11mm Expansion Hole.
- Ø 25mm Domed weatherseal EPDM washer.
- Fool proof design for both beginners and professionals.
WASHER
Ø 25mm Domed weatherseal EPDM washer
- Domed Structure: Superior strength against high winds.
- Two Concentric Sealing Rims: Keeps the 11mm expansion hole fully sealed.
Installation Procedure:
- Press drill point onto the corrugation crest.
- Use a lower RPM and tap in quick succession until the polycarbonate sheet is penetrated and drill point comes in contact with the wooden substrate.
- Continue to drill through the wooden substrate as you would a standard Type 17 screw.
- The circular saw will penetrate the polycarbonate sheet and form a perfect expansion hole.
- Stop drilling when the domed EPDM conforms to the corrugation, which forms a weather tight seal.
BN3 Head Mark
|
Surface Coating
|
|
| Corrosion Resistance | Class 3 | |
| Coating Type | Zinc+ Organic Coating (Ruspert) | |
|
SST 1000 hrs + Kesternich 7 cycles |
||
If you need more information about our products or get samples, we are very happy to help!
Fill in the form below and we’ll get back to you as soon as possible.
